Follow
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

I5-03: MECHANICAL EQUIVALENT OF HEAT - JOULE'S MET 7 years 10 months ago #1353

  • zzfixk21
  • zzfixk21's Avatar Topic Author
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 1014
  • Karma: 1
  • Thank you received: 0




ID Code: I5-03
Purpose: Determine the mechanical equivalent of heat.
Description: Turning the handle with weights hanging from a cord wrapped around the copper cylinder requires a calculable amount of mechanical energy. This energy is converted into heat in the copper cylinder and the water bath, raising their temperature. The constant of proportional, which is the mechanical equivalent of heat, can be calculated using these two measurements. The device counts turns, so you can continue to lecture while cranking, typically 100-150 turns. The result is generally good to better than ten percent. (Note that when you turn the handle the heavy weight should be lifted off the floor, so the net frictional force causing the heating of the cylinder is the difference between the weights on the two ends of the cord.)
Availability: Available

Please Log in to join the conversation.

  • Page:
  • 1
Time to create page: 0.089 seconds