Print this page
Friday, 06 June 2014 14:02

P2-05: PHOTO-RESISTOR RELAY

p2-05ap2-05b

Additional Info

  • ID Code: P2-05
  • Purpose: Demonstrate operation of a photoresistor.
  • Description:

    A selenium photoresistor is in series with the coil in a relay circuit used to turn a light on and off. When no light shines on the selenium, it has a high resistance; however, as light falls on it the resistance falls. When the resistance is low the photoresistor passes current which turns on the relay. The light is connected in series with 110VAC through a normally open relay contact. Thus the light is made to go on and off because of the change in the resistance of the selenium due to an external light, which causes the relay to close or open.

    During the daylight, when a streetlight remains on, it is often due to pigeons despoiling the photocell, as illustrated in the photograph at the right above, where a piece of simulated pigeon poop has been positioned on the photocell, blocking the light.

  • Availability: Available
  • Loc codes: P2, LS2
Read 2494 times Last modified on Monday, 17 August 2020 11:44